1. Summary
The TM5340B is a portable, multi-function meter that measures magnetic field, equipped with high sensitivity, low drift triaxial Hall sensor. It is applied for measuring the magnetic density value of DC or AC triaxial magetic field.
2. Features
• Range: 2 mT～3000 mT.
• Accuracy: 5%.
• Measuring XYZ component, vector synthetic value.
• Switching AC or DC mode.
• +/- polarity display.
• Unit switch: mT, G, A/m.
• Relative measurement mode.
• Max. hold function.
• Alarm of exceeding the upper / lower limit.
• Probe temperature compensation.
• Magnetic measurement data storage.
• Lithium battery, remaining power display.
• USB interface.
• Optional magnetic shielded cavity.
3. Application
4. Specifications
XYZ Range | 30 mT | 300 mT | 3000 mT ① |
R Range | 52 mT | 520 mT | 5200 mT |
Resolution | 1 μT | 10 μT | 0.1 mT |
Measuring Range | 2 mT～3000 mT | ||
Accuracy | DC: ±(0.5% + 200 μT), AC: ±(3% + 500 μT) | ||
Frequency Range | DC,40 Hz～500 Hz | ||
Temperature Coefficient | ± 0.06% / K | ||
Zero Drift | ± 0.1 mT / h | ||
Display Digits | 5 | ||
Remark | 1 : Calibration only covers 2.5T | ||
5. General Specifications
Power Supply | 4000 mAh lithium battery, USB charging |
Temperature Performance | Operating temperature:0°C～45°C Storage temperature:-20°C～70°C |
Humidity Performance | Working humidity:20%～80% R·H, non-condensing Storage humidity:< 85% R·H, non-condensing |
Weight | About 500 g |
Interface | Hall probe input interface, USB interface |
Dimensions | 90 mm(W) × 40 mm(D) × 165 mm(H) |
Advanced Multifunction Calibrator Advanced Electrical Reference Standards Electric Vehicle （EV）Charging Facility Tester AC/DC Standard Source /Meter Single-phase/Three-phase Standard Meter Magnetic Parameters Measurement and Calibration Magnetic Material Testing Equipment Electrical Steel Testing Equipment