1. Summary
TH0475 is a precision buffer specially used to convert high internal resistance signal into low resistance output. It has good AC-DC difference and phase shift performance. It is a necessary instrument for V/V and I/V precision converter output. It can Set up various automatic test systems to realize precise measurement of broadband voltage, current, phase, power and other electrical parameters.
2. Feature
Voltage Input: 0.05 Vrms~1.2 Vrms
Impedance Input : 5 MΩ
Gain Value: 1
Working Frequency Range: 100 kHz~1 MHz
Battery-powered, the continuous working time after fully charged is not less than 7 hours.
Small size and light weight, easy to carry and use on site.
3. Application
Testing buffer output of coaxial shunt, V/V converter, I/V converter, etc.
Precise measurement of broadband voltage, current, phase, power, etc.
Transformer phase displacement measurement.
Power quality analysis.
Measurement application under low power factor.
4. General Specifications
Power Supply | Battery-powered, continuous working time is not less than 7 hours after fully charged |
Temperature Performance | Working temperature: 13 °C ~ 33 °C; Storage temperature: 5 °C ~ 45 °C; |
Humidity Performance | Working humidity: 50% R·H, non-condensing; Storage humidity: (15% ~ 80%) R·H, non-condensing. |
Altitude | < 3000 m |
Weight | About 1.5 kg |
Input and Output Interface | Input: Type-N male connector Output: Type-N female connector |
Maximum Dimensions | 200 mm (W) × 120 mm (D) × 105 mm (H) |
Advanced Multifunction Calibrator Advanced Electrical Reference Standards Electric Vehicle (EV)Charging Facility Tester AC/DC Standard Source /Meter Single-phase/Three-phase Standard Meter Magnetic Parameters Measurement and Calibration Magnetic Material Testing Equipment Electrical Steel Testing Equipment