1.Summary
TY3000 is a precision magnetic moment measuring tester designed with a high-speed microprocessor and a low-drift electronic integrator. It can be paired with various specifications of magnetic moment measurement coils to measure the magnetic moment M and magnetic flux Φ of magnetic components such as permanent magnet ferrite, AlNiCo, NdFeB, and Samarium Cobalt (SmCo) Magnets. It provides a good test for analyzing and evaluating the magnetizing performance of permanent magnets.
Reference Standard IEC 60404-14:2002 "Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method".
2. Feature
• Measurement Range: 0.2 m Wb~2 Wb.
• Accuracy: 0.2 %/ 0.5 %.
• The drift after zero adjustment is very small, the typical value is lower than 1μWb/min.
• 5-digit display, the minimum resolution is as low as 0.1μWb.
• Optional units: Wb, Vs, Wb·cm, Vs·cm, etc.
• Automatically calculate the magnetic moment M according to the set coil constant.
• With the function of holding the maximum value.
• Support exceeding upper limit/lower limit alarm.
• Support one-key reset and zero drift.
• Support test parameter correction function.
• Adopt the combination operation mode of touch screen and button.
• Support digital and analog signal (option) output mode.
• Support a variety of measuring coils to suit different application scenarios.
• Small size, light weight, suitable for field use.
3.Specifications
Range | 2 mWb | 20 mWb | 200 mWb | 2 Wb | |
Resolution | 0.1 μWb | 1 μWb | 10 μWb | 0.1 mWb | |
Measurement Range | 0.2 mWb~2 Wb | ||||
Magnetic Moment Measuring Range | M=K*Ф ( K: Coil Constant for Magnetic Moment Measurement) | ||||
Measurement Uncertainty (k=2) | 0.5 % | 0.5%*RD① + 10 μWb | |||
0.2 % | 0.2%*RD① + 10 μWb | ||||
Zero Drift | 1 μWb/min or 0.05%*RG ②/min (take the larger value) | ||||
Analog Output | 0~± 5 V or 4~20 mA | ||||
Note | ① RD is the reading value, ② RG is the range value ③ The analog output function is an option, whether it is needed or not must be specified when ordering |
4.General Specifications
Power Supply | AC ( 220 ± 22 ) V,( 50 ± 2 ) Hz |
Temperature Performance | Working temperature: 0°C~40°C; storage temperature: -20°C~70°C |
Humidity Performance | Working humidity: 40%~85% R·H non-condensing Storage humidity: < 95% R·H, non-condensing |
Weight | About 5 kg |
Communication Interface | Coil Input Interface, RS232 Interface, Analog Output Interface |
Dimensions | 225 mm(W) × 295 mm(D) × 135 mm(H) |
5. Ordering Information
Advanced Multifunction Calibrator Advanced Electrical Reference Standards Electric Vehicle (EV)Charging Facility Tester AC/DC Standard Source /Meter Single-phase/Three-phase Standard Meter Magnetic Parameters Measurement and Calibration Magnetic Material Testing Equipment Electrical Steel Testing Equipment