TS4000 DC Magnetic Properties Measuring
System for Soft Magnetic Materials
*Above picture is only for reference, subject to actual delivery
TS4000 is DC Magnetic Properties Measuring System for Soft Magnetic Materials. The product design conforms to the standard IEC 60404-4, IEC 60404-7. The complete system contains DC excitation and measurement host , Type A or B Permeameter (optional accessories), solenoid (optional accessories), electromagnet (optional accessories), system level software.
l Electrical parameters calibration function.
l The specimen is demagnetized using slow amplitude reduction.
l Ultra-wide range of current continuously and stably adjustment.
l Scanning method doesn’t use relay to switch current range.
l Support scanning and impact testing method.
l A /B Permeameter (optional): apply for open-circuit specimen testing.
l Solenoid (optional) : apply for Hc of specimen testing.
l Modular design, easy to upgrade or maintenance.
l Automatically testing by professional software.
4. Magnetic Parameter Specifications
Specimen Type | Method | Parameter | Uncertainty ( k = 2 ) | Repeatability |
Ring Specimen | Impact Testing Method | Bs | 1.0% | 0.3% |
Br | 1.0% | 0.3% | ||
Hc | 1.0% | 0.5% | ||
μi | 4.0% | 1.5% | ||
μm | 2.0% | 1.0% | ||
Open-circuit Specimen | Permeameter (Impact Method) | Bs | 2.0% | 0.5% |
Permeameter, Electromagnet (Scanning Method) | Bs | 2.0% | 0.5% | |
Br | —— | 0.5% | ||
Hc | —— | 0.5% | ||
Solenoid (Throwing Method, Fluxgate) | Hc | 2.5%① | 1.0%① |
• Measurement conditions :(23 ± 5)℃, demagnetized before testing.
• Ring specimen should be thin-walled rings, the ratio of outer diameter to inner diameter should be less than 1.1.
• Note ①: use reference specimen to test.
5. Electrical Parameter Specifications
Output | Current Range | 0 ~ ± 25 A |
Maximum Power | 1000 W | |
Adjustment Fineness | 0.005%*RG ① | |
Current Uncertainty(k=2) | 0.2% | |
Flux Meter | Range | 500 μWb、5 mWb、25 mWb |
Drift | Max. value of 0.05%*RG/min or 1 μWb/min | |
Uncertainty(k=2) | 0.3% + 5 μWb | |
Tesla Meter (Optional) | Range | 0~2000 mT |
Uncertainty(k=2) | 0.5%*RG(B≤2000 mT) | |
Features | Hall probe nonlinear correction function | |
Note ①: RG is the range value; ②Tesla meter function is optional. |
6. General specifications
Power Supply | AC (220±22) V,(50±2) Hz |
Temperature Performance | Operating Temperature: 0°C~40℃; Storage Temperature: -20°C~70°C |
Humidity Performance | Operating Humidity: 40%~80% R·H, no condensation Storage Humidity : < 95% R·H, no condensation |
7. Solenoid (optional)
Model | TS7750-A-55-600 | TS7750-B-55-600 | TD7750-C-55-600 |
Type | Single solenoid | Double solenoid | Fluxgate solenoid |
Diameter of inner hole Ф | 55 mm | 55 mm | 55 mm |
Length of inner hole L | 600 mm | 600 mm | 600 mm |
Turns number of Coil | About 2270 T | About 2270 T | About 2270 T |
Imax | DC,± 20 A | DC,± 10 A | DC,± 20 A |
Coil constant KH | About 3780 1/m | About 3780 1/m | About 3780 1/m |
Coil constant KB | About 4.75 mT/A | About 4.75 mT/A | About 4.75 mT/A |
Impedance | About 1.8 Ω | About 3.6 Ω | About 1.8 Ω |
Dimension (L × W × H, mm) | 650 × 230 × 230 | 650 × 600 × 230 | 650 × 230 × 230 |
Weight | About 50 kg | About 100 kg | About 50 kg |
Working temperature | 0°C~45°C | 0°C~45°C | 0°C~45°C |
8. Type A and B Permeameter (optional)
Model | TS7710-A | TS7710-B |
Type | Type A Permeameter | Type B Permeameter |
Range of H | ( 1 ~ 200 ) kA/m | (1 ~ 50 ) kA/m |
Coil | Field coil | Rogowski-Chattock coil |
Specimen length | ≥ 250 mm | ≥ 100 mm |
Dimension (L × W × H) | 490 mm × 330 mm × 240 mm | 580 mm × 220 mm × 270 mm |
Weight | About 65 kg | About 53 kg |
9. Electromagnet (optional)
Picture | Function |
| Hmax is up to 1.2T. |
Magnetic field programmable continuously adjustable. | |
Poles are made of pure iron, and its surface is highly parallel | |
Pole diameter: 100 mm, | |
The gap between 2 poles can be adjusted in the range of 0 ~ 50mm | |
Low input power. | |
Natural cooling mode, don’ use external water cooler. |
Advanced Multifunction Calibrator Advanced Electrical Reference Standards Electric Vehicle (EV)Charging Facility Tester AC/DC Standard Source /Meter Single-phase/Three-phase Standard Meter Magnetic Parameters Measurement and Calibration Magnetic Material Testing Equipment Electrical Steel Testing Equipment