TY1500 Electromagnet
*Above picture is only for reference, subject to actual delivery
1. Summary
TY1500 electromagnet can install different specifications of pole heads and excite with DC current source. It can produce a large and continuously adjustable magnetic field, with good uniformity and linearity. The electromagnet can be used as an excitation device for permanent magnet samples, to detect their magnetic properties. TY1500 electromagnet has a low input power / magnetic field, and features low carbon, environmental protection and energy-saving. It adopts a natural cooling method and does not require an external water cooling system for heat dissipation. Electromagnets with pole diameters of 250mm or 280mm can be equipped with an optional pole head automatic lifting function (accessory).
2. Features
• Various of poles are available on request.
• Electromagnet excited by current source generates large magnetic field.
• Use for testing magnetic properties of hard magnetic materials.
• Natural cooling, without external water cooler for heat dissipation.
• Automatic lifting poles function is optional（only 250 mm or 280 mm poles）.
3. Specifications
Model | Pole Diameter | Air Gap | Imax | Hmax (10 mm Gap) | Apply to System |
TY1500-100 | 100 mm | 0～50 mm adjustable | DC , ±25 A | 1.2 T | TS4000 |
TY1500-130 | 130 mm | 0～80 mm adjustable | DC , ±25 A | 2.45 T | TY1000 |
TY1500-150 | 150 mm | 0～80 mm adjustable | DC , ±25 A | 2.50 T | |
TY1500-250 | 250 mm | 0～50 mm adjustable | DC , ± 60 A | 3.0 T | TY1100 |
TY1500-280 | 280 mm | 0～50 mm adjustable | DC , ±60 A | 3.2 T | |
• Note: Hmax of the electromagnet depends on the poles. | |||||
4. Ordering Information
Advanced Multifunction Calibrator Advanced Electrical Reference Standards Electric Vehicle （EV）Charging Facility Tester AC/DC Standard Source /Meter Single-phase/Three-phase Standard Meter Magnetic Parameters Measurement and Calibration Magnetic Material Testing Equipment Electrical Steel Testing Equipment