1. Summary
TM7600 is a series of high precision magnetic flux measuring instruments, using advanced digital sampling and integration methods. It overcomes the defects of traditional capacitance-integrated (RC-integrated) flux meters, such as the long-term drift of capacitance, piezoelectric effect, leakage current and bias voltage/current of amplifier, which lead to the difficulty of improving the measurement accuracy and the obvious integral drift after clearing. It provides an effective measurement method for the research and development of advanced magnetic materials, the manufacture of high-end industrial products and the traceability of magnetic flux value.
2. Features
• Accuracy: 0.02%, 0.05%, or 0.1%.
• The drift is ≤ 0.5 μWb/min at accuracy 0.05%.
• Unit switch: Wb, mWb, Vs, mVs, Mx.
• Alarm of exceeding the upper / lower limit.
• One-key reset and zero drift.
• Class 0.02 support ф (t) and U(t) measurement curve display.
• Saves the voltage zero at the input end of the coil.
• Support coil resistance input to eliminate effects.
• Support various of measuring coils.
• Digital and analog signal (option) output.
• Large LCD touch screen.
• Small size, light weight.
3. Specifications
3.1 Voltage Measurement
Range | Resolution | Accuracy ± (ppm of reading + ppm of range) [1] | Temperature coefficient ± ppm*RD /°C @15℃~30℃ | ||
0.1 % | 0.05 % | 0.02 % | |||
50 mV | 0.1 μV | 0.06 + 0.03 | 0.02 + 0.02 | 0.012 + 0.006 | 10 |
500 mV | 1 μV | 0.06 + 0.03 | 0.02 + 0.02 | 0.012 + 0.006 | 10 |
5 V | 10 μV | 0.06 + 0.03 | 0.02 + 0.02 | 0.012 + 0.006 | 10 |
50 V | 100 μV | 0.06 + 0.03 | 0.02 + 0.02 | 0.012 + 0.006 | 10 |
Note [1] : (ppm = parts per million) (e.g., 10ppm = 0.001%). |
3.2 Magnetic Flux Measurement
Accuracy | 0.1 % | 0.05 % | 0.02 % |
Method | Voltage measurements are digitally integrated against time | ||
Range | Scope of the theory:0.0 Wb~999999 Wb | ||
Minimum resolution | 10 nWb | 10 nWb | 10 nWb |
Integration time Accuracy | ± 0.005% | ± 0.005% | ± 0.002% |
Magnetic flux Accuracy | ±(0.1%*RD + 10 μWb) | ±(0.05%*RD + 5 μWb) | ± (0.02%*RD + 2 μWb) |
Zero drift typical value | 1 μWb/min | 0.5 μWb/min | 0.5 μWb/min |
Digits display | 6-digits | 6-digits | 6-digits |
4. Ordering Information
5. General Specification
Power Supply | AC (220±22) V,(50±2) Hz |
Temperature Performance | Operating Temperature: ( 23 ± 5 )℃; Storage Temperature: -20°C~70°C |
Humidity Performance | Operating Humidity: 40%~80% R·H, no condensation Storage Humidity : < 80% R·H, no condensation |
Weight | About 4 kg |
Interface | Flux Coil Input, RS232, Control, Analog Output Interface |
Dimensions | 300 mm(L) x 230 mm(W) x 152 mm(H) |
Advanced Multifunction Calibrator Advanced Electrical Reference Standards Electric Vehicle (EV)Charging Facility Tester AC/DC Standard Source /Meter Single-phase/Three-phase Standard Meter Magnetic Parameters Measurement and Calibration Magnetic Material Testing Equipment Electrical Steel Testing Equipment