TD3750 AC Power Detection Device for Electromagnetic Compatibility Testing

Model: TD3750
Brand: TUNKIA

Product Description

* For reference only. Configuration and details may vary depending on the application scenario.。

1. Summary

TD3750 is a device used to test the electromagnetic compatibility (EMC) of single-phase or three-phase AC energy meters, mainly composed of a three-phase standard power source, a filter module, system software, etc. The device has a measurement uncertainty of class 0.05 and can be used in conjunction with relevant EMC influence quantity generation devices to complete relevant energy meter EMC tests.

2. Features

• High reliability: Maximum output 456 V / 60 A, continuous operation at the load point (1.1Umax, Imax) for 1000h can ensure the stability of the value output.

• Single-phase and three-phase compatibility: Supports single-phase meter test for single meter position, and supports three-phase meter test for three meter positions.

• Filter network: The device has voltage signal, current signal, and pulse signal filter networks, which can effectively filter interference signals in Class A acceptance tests and conduct real-time tests on the metering performance of the meter under test.

• Supports multiple energy metering methods such as forward and reverse active energy, four-quadrant reactive energy, etc.

• The software has comprehensive data management functions, convenient data retrieval, and automatic backup functions.

• The software can output statistical reports such as verification certificates and test reports; supports document saving and printing in multiple formats.

3. Test Items

For Class A acceptance tests, the metering performance of the DUT can be verified in the EMC impact test. The detailed test items are as follows:

• Electrical fast transient pulse group

• Damped oscillating wave

• RF electromagnetic field radiation (with current)

• RF field induced conducted interference

• Differential mode current interference test (only supports single meter position test)

For Class B acceptance test, the metering performance of the DUT can be verified after the EMC influence is removed. The detailed items are as follows:

• Electrostatic discharge

• Radiated RF electromagnetic field

• Surge

• Radiated RF electromagnetic field (no current)

Specification

4. Specification

4.1 Three-phase Voltage Output

Range	Resolution	Short-term Stability ( % / min )	Measurement Uncertainty (k=2) ( ppmRD+ppmRG) [1]	Distortion ( % )
60 V	0.1 mV	0.01	200 + 50	< 0.3
120 V	1 mV	0.01	200 + 50	< 0.3
240 V	1 mV	0.01	200 + 50	< 0.3
380 V	1 mV	0.01	200 + 50	< 0.3
Note [1]: RD is the reading value, RG is the range value, the same below

• Output range: 6 V ~ 456 V, 6-digit display, load capacity: 15 VA / (phase meter position)

• Symmetry: voltage ≤ 0.2%, phase ≤ 0.5°

• Protection function: short circuit protection, overload protection

4.2 Three-phase Current Output

Range	Resolution	Short-term Stability ( % / min )	Measurement Uncertainty (k=2) ( ppmRD+ppmRG)	Distortion ( % )
100 mA	1μA	0.01	200 + 50	< 0.5
200 mA	1μA	0.01	200 + 50	< 0.5
500 mA	1μA	0.01	200 + 50	< 0.5
1 A	10μA	0.01	200 + 50	< 0.5
2 A	10μA	0.01	200 + 50	< 0.5
5 A	10μA	0.01	200 + 50	< 0.5
10 A	100μA	0.01	200 + 50	< 0.5
20 A	100μA	0.01	200 + 50	< 0.5
50 A	100μA	0.01	200 + 50	< 0.5

• Output range: 10 mA ~ 60 A, 6-digit display, load capacity: 30 VA / (phase meter position)

• Symmetry: current ≤ 0.5%, phase ≤ 0.5°

• Protection function: open circuit protection, overload protection

4.3 Frequency/Phase

Frequency	Measuring range	45 Hz ~ 65 Hz
	Minimum resolution	0.000 01 Hz
	Measurement uncertainty (k=2)	0.005%*RD
Phase （I ≥ 50mA）	Measuring range	0 ~ 360°
	Minimum resolution	0.000 1°
	Measurement uncertainty (k=2)	0.012°

4.4 Power/Energy

Voltage Range	Current Range	Power Factor	Measurement Uncertainty(k=2)
30 V ≤ U ≤ 480 V	50 mA ≤ I ≤ 60 A	0.5L~1~0.5C	0.05%*RD
	10 mA ≤ I < 50 mA	1	0.05%*RD
	10 mA ≤ I < 50 mA	0.5L~1~0.5C	0.08%*RD
	5 mA ≤ I < 10 mA	1	0.08%*RD
	5 mA ≤ I < 10 mA	0.5L~1~0.5C	0.15%*RD

• Output power stability: 0.02% / 2min;

• Power/energy measurement range: combination of AC voltage range and AC current range;

• Power factor measurement range: -1.000 00…0.000 00…1.000 00;

• Standard electric energy pulse output: high frequency full range value corresponds to 60 kHz, low frequency full range value corresponds to 6 Hz;

• Standard electric energy pulse input: frequency ≤ 200 kHz, voltage: 0…3.3 V…24 V;

• Energy error display: automatic, with a resolution of 0.0001%.

5. General Specification

Power Supply	Single-phase AC ( 220 ± 22 ) V, ( 50 ±2 ) Hz
Power Consumption	About 1500 VA
Warm-up Time	30-min
Temperature Performance	Working temperature: 5°C~45°C； Storage temperature: -10°C~55°C
Humidity Performance	Working humidity: < 80% @ 30°C, < 70% @ 40°C, < 40% @ 50°C Storage humidity: (20%~80%) R H, no condensation
Altitude	< 3000 m
Communication Interface	RS232
Dimensions	550 mm(W) x 700 mm(D) x 1472 mm(H)

Download

{"json":"[{\"downloadUrl\":\"//ijrorwxhqkiklq5p-static.micyjz.com/TD3750+AC+Power+Detection+Device+for+Electromagnetic+Compatibility+Testing-aidloBplKmolkSRnkiprkoliq.pdf?dp=1\",\"encodeFileId\":\"pbpfUveGLhQj\",\"fileId\":6961264,\"fileName\":\"TD3750 AC Power Detection Device for Electromagnetic Compatibility Testing.pdf\",\"fileType\":\"pdf\",\"photoUrlNormal\":\"//rirorwxhqkiklq5p-static.micyjz.com/static/assets/widget/images/downloadNew/pdf.svg\",\"pname\":\"TD3750 AC Power Detection Device for Electromagnetic Compatibility Testing.pdf\",\"name\":\"TD3750 AC Power Detection Device for Electromagnetic Compatibility Testing.pdf\"}]","type":"1"}