TD3730 Energy Meter Power Frequency Strong Magnetic Field Test Device
Power frequency magnetic field generator | Power frequency excitation current source | Handheld alternating magnetometer |
* Reference only. Configurations and details may vary depending on the application scenario.
1. Summary
TD3730 is a device specially used to test the influence of industrial frequency strong magnetic field on electric energy meter. It consists of power frequency excitation current source, power frequency magnetic field generator and handheld alternating magnetometer.
2. Features
• The power frequency magnetic field generator is excited by the excitation current source to generate a 0-100mT programmable power frequency magnetic field.
• The power frequency magnetic field generator can generate a large power frequency magnetic field within the range of 70 mm × 35 mm.
• The magnetic field strength of the testing point can be tested by scanning the magnetic field with the coil probe of the handheld alternating magnetometer.
• The power frequency magnetic field is applied to the six faces of the electric energy meter to be tested, and the user's electric energy meter calibration device is used to complete the test of the influence of the power frequency strong magnetic field on the electric energy meter error.
3. Specification
Power Frequency Excitation Current Source | Output voltage | 0 ~ 240 V |
Output current | 0 ~ 63 A | |
Maximum excitation power | 15 kVA | |
Operating frequency | 45 Hz ~ 65 Hz | |
Power Frequency Magnetic Field Generator | Magnetic field adjustment range | 0 ~ 100 mT |
Adjustment fineness | 0.1 mT | |
AC magnetic field stability | 1%/min | |
Handheld Alternating Magnetometer (Magnetic Field Testing) | Range | 20 mT, 200 mT |
Measurement range | 2 mT ~ 240 mT | |
Optimal measurement uncertainty (k=2) | 2% | |
Frequency range | 45 Hz ~ 100 Hz | |
Display digits | 4 decimal digits display |
4. General Specification
Device | Power frequency excitation current source | Power frequency magnetic field generator | Handheld alternating magnetometer |
Power Supply | Three-phase five-wire system | —— | 3 AA batteries |
Size (mm) (W*D*H) | 730 x 600 x 1270 | 300 x 300 x 250 | 165 x 90 x 40 |
Weight (kg) | 200 | 40 | 0.4 |
Communication interface | RS232 | —— | USB |
Temperature performance | Working temperature: 5°C~45°C; Storage temperature: -10°C~55°C | ||
Humidity Performance | Working humidity: < 80% @ 30°C, < 70% @ 40°C, < 40% @ 50°C Storage humidity: (20%~80%) R H, no condensation |
Advanced Multifunction Calibrator Advanced Electrical Reference Standards Electric Vehicle (EV)Charging Facility Tester AC/DC Standard Source /Meter Single-phase/Three-phase Standard Meter Magnetic Parameters Measurement and Calibration Magnetic Material Testing Equipment Electrical Steel Testing Equipment