You are here: Home » Products » Electrical Steel Testing Equipment » TS1710 Surface Insulation Resistance Automatic Measuring System for Electrical » TS1710 Surface Insulation Resistance Automatic Measuring System for Electrical Steel

TUNKIA TS1710 Surface Insulation Resistance Automatic Measuring System for Electrical Steel

Share to:

TS1710 Surface Insulation Resistance Automatic Measuring System for Electrical Steel

TS1710 is a special instrument for measuring the surface insulation resistance (single-sided) or interlayer resistance (double-sided) of electrical steel sheets. The reference standard is IEC60404-11.

Availability:

Quantity:



Inquire Add to Basket

Model:
TS1710
Brand:
TUNKIA

TS1710 Surface Insulation Resistance Automatic Measuring System for Electrical Steel

TS1710 Surface Insulation Resistance Automatic Measuring System for Electrical Steel 2

*Above picture is only for reference, subject to actual delivery

1. Summary

TS1710 is a special instrument for measuring the surface insulation resistance (single-sided) or interlayer resistance (double-sided) of electrical steel sheets. The reference standard is IEC60404-11.

2. Features

Fully automatic feeding - turning over - testing - data uploading - unloading.
Automatically measure five different test areas, the front and back sides do not overlap.
24 hours of uninterrupted operation.
The conventional method is manual feeding, and AGV and other feeding methods can be customized.
Guarantee personal safety, functional safety and information safety.
Reliability, fault tolerance, upgradeability and easy maintenance.
Data fusion and sharing, data comparability and consistency.
Built-in precision DC stabilized power supply and precision DC current measurement unit.
Equipped with standard resistance circuit board for daily verification of the system.
An optional code reader can be used to automatically scan the code. (optional)
Transparent shielding enclosure: to ensure the safety of operators, and to observe the internal test situation from outside.
Warning light: green light when working normally, red light when abnormal state.

TS1700 Surface Insulation Resistance Measuring System for Electrical Steel

TD9100 Online Testing System for Magnetic Properties of Silicon Strip

TS1000 DC Magnetic Properties Measuring System for Electrical Steel

TS1020 DC Magnetic Properties Measuring System for Yoke Steel

TS1100 AC Magnetic Properties Measuring System for Electrical Steel

TS1200 AC Magnetic Properties Measuring System for Electrical Steel

TS1300 AC/DC Magnetic Properties Measuring System for Electrical Steel

TS2000 Rotational Magnetic Properties Measuring System for Electrical Steel

TS3000 Magnetic Properties Multifunction Measuring System for Electrical Steel

TS2600 Iron loss Fast Tester for Electrical Steel Sheets

Voltage Output Range	DC，0 ～ 500 mV
Current Measurement Range	DC，0 ～ 1.2 A
Uncertainty of Voltage and Current (k=2)	0.1%*RG ^[1]
Current Measurement Range of Copper Plate Test	0.98 A ～ 1.02 A
l Note: [1] RG is range；

Type	Contact A (standard)	Contact B (optional)
Area of Single Contact	64.5 × (1± 1%) mm²	100 × (1± 1%) mm²
Area of 10 Contacts	645 × (1± 1%) mm²	1000 × (1± 1%) mm²
Total pressure of 10 Contacts	1290 × ( 1 ± 5% ) N	2000 × ( 1 ± 5% ) N
Pressure Measurement Range	0.01 ～ 5.00 N/mm²
Uncertainty of Pressure Measurement	0.5%
Pressurization Time	within 20s per point

Power Supply	AC ( 220 ± 22 ) V，( 50 ± 2 ) Hz
Temperature Performance	Working Temperature：0°C～40°C； Storage Temperature：-20°C～70°C
Humidity Performance	Working Humidity：40%～80% R·H，No condensation Store Humidity：< 95% R·H，No condensation
Air Supply	The compressed air pressure is not less than 0.6 MPa，and the air consumption is not less than 100 L/min The air source can be purchased with an air compressor or solved by yourself

Voltage Output Range	DC，0 ～ 500 mV
Current Measurement Range	DC，0 ～ 1.2 A
Uncertainty of Voltage and Current (k=2)	0.1%*RG ^[1]
Current Measurement Range of Copper Plate Test	0.98 A ～ 1.02 A
l Note: [1] RG is range；

Type	Contact A (standard)	Contact B (optional)
Area of Single Contact	64.5 × (1± 1%) mm²	100 × (1± 1%) mm²
Area of 10 Contacts	645 × (1± 1%) mm²	1000 × (1± 1%) mm²
Total pressure of 10 Contacts	1290 × ( 1 ± 5% ) N	2000 × ( 1 ± 5% ) N
Pressure Measurement Range	0.01 ～ 5.00 N/mm²
Uncertainty of Pressure Measurement	0.5%
Pressurization Time	within 20s per point

TS1710 Surface Insulation Resistance Automatic Measuring System for Electrical Steel

TS1710 Surface Insulation Resistance Automatic Measuring System for Electrical Steel

1. Summary

2. Features

TS1710 Surface Insulation Resistance Automatic Measuring System for Electrical Steel

1. Summary

2. Features

3. Specifications

3.1 Specifications of Electrical Parameters

5. General specifications

3. Specifications

3.1 Specifications of Electrical Parameters

5. General specifications

RELATED PRODUCTS

SIGN UP FOR NEWSLETTER

INFORMATION

PRODUCT CATEGORY

CONTACT US