Publish Time: 2024-01-12 Origin: Site
TUNKIA’s laboratory testing solution adopts offline testing methods and is specially designed for precise, efficient and intelligent testing of electrical steel. Our solution can test the AC magnetic properties of oriented or non-oriented electrical steel, transformer or motor core in the range of 3Hz to 20kHz, and draw the magnetic characteristic curve. Our solution adopts various testing methods such as using specimen, Epstein frame, and single sheet.
Our solution uses the world's unique quadratic sine high-speed hardware negative feedback technology, demonstrating TUNKIA’s leading broadband measurement capabilities, and supports both H-coil and M.C methods. It has high reliability, and everything from high-end component selection to hardware circuit design has been industrialized to ensure long-life operation of the equipment. It is equipped with alarm prompts, automatic protection reset and other functions, and provides a third-party calibration interface to ensure stable and efficient operation of the equipment.
It is easy to operate and has been newly upgraded based on many years of application experience to be closer to user needs. This system can be expanded to multiple applications to achieve full performance testing of electrical steel.
| |
Application | Product | Specification |
AC Magnetic Properties Measurement | TS1100 AC Magnetic Properties Measuring System for Electrical Steel | AC, 45Hz~1kHz optional, supports M.C method |
TS1200 AC Magnetic Properties Measuring System for Electrical Steel | AC, 45Hz~10kHz optional, M.C method or M.C method/H-Coil method optional | |
TS1300 AC DC Magnetic Properties Measuring System for Electrical Steel | DC, 3Hz~20kHz optional, M.C method or M.C method/H-Coil method optional | |
Other Magnetic Properties Measurement | TS1700 Surface Insulation Resistance Measuring System for Electrical Steel | Type A: IEC/China national standard method; Type B: TUNKIA’s method; manual loading and unloading, manual turning, automatic measurement |
TS1770 Silicon Steel Coating Adhesion Tester | Manual loading and unloading, manual testing | |
TS1780 Stacking Factor Measuring System for Electrical Steel Sheets | Manual loading and unloading, automatic measurement, compatible with TS3200 automatic system | |
TS1800 Repeated Bending Testing System for Electrical Steel Sheets | Manual loading and unloading, manual bending, automatic counting | |
TS3300 Electrical Steel Magnetostriction Measurement Device | Manual loading and unloading, M.C method or M.C/H-Coil method, optional harmonic influence test function, optional pressure loading test function | |
TD8160 Single Sheet Amorphous Magnetic Measurement System | 40Hz~65Hz, can be customized to 400Hz, various specifications of magnetic permeameters are available | |
TS2500 Magnetic Properties Measuring System for Electrical Steel Cores | The output power can be customized according to the specimen under tested and the testing conditions. | |
TS2600 Iron loss Fast Tester for Electrical Steel Sheets | Basic test points: 50Hz/60Hz，P1.0/P1.5/P1.7, multiple upgrade specifications available | |
TS5400 Iron Core VoltAmpere Characteristic Tester | Quickly determine whether the volt-ampere characteristics of the core are qualified |
| |
Application | Product | Specification |
Comprehensive Magnetic Properties Measurement | TS3200 Electrical Steel Sheet Magnetic Properties Automatic Measurement System (Epstein frame) | Epstein frame fully automatic loading-testing-data upload-unloading, automatic stacking coefficient measurement function is optional |
TS3210 Automatic Measurement System for Magnetic Properties of Electrical Steel Sheets (Single Sheet) | Fully automatic loading-testing-data upload-unloading | |
Other Magnetic Properties Measurement | TS3300 Electrical Steel Magnetostriction Measurement Device | Automatic loading and unloading, M.C method or M.C/H-Coil method, optional harmonic influence test function, optional pressure loading test function |
TS1710 Surface Insulation Resistance Automatic Measuring System for Electrical Steel | IEC/Chinese standard method, automatic loading and unloading, automatic turning, automatic measurement | |
TS1810 Repeated Bending Automatic Testing System for Electrical Steel Sheets | Automatic loading and unloading, automatic bending, automatic counting, optional automatic determining function |
| |
Application | Product | Specification |
DC Magnetic Properties Measurement | TS1000 DC Magnetic Properties Measuring System for Electrical Steel | DC, max magnetic field 30kA/m |
TS1020 DC Magnetic Properties Measuring System for Yoke Steel | DC, max magnetic field 75kA/m | |
Other Magnetic Properties Measurement | TS2000 Rotational Magnetic Properties Measuring System for Electrical Steel | Measurement of magnetic properties at 0~360, 45~400Hz, supports M.C and H-Coil methods |
TS3000 Magnetic Properties Multifunction Measuring System for Electrical Steel | DC, 3Hz~20kHz, supports M.C and H-Coil method, -50~220 |
Advanced Multifunction Calibrator Advanced Electrical Reference Standards Electric Vehicle （EV）Charging Facility Tester AC/DC Standard Source /Meter Single-phase/Three-phase Standard Meter Magnetic Parameters Measurement and Calibration Magnetic Material Testing Equipment Electrical Steel Testing Equipment