Publish Time: 2024-01-08 Origin: Site
TS2600 is an instrument used to quickly measure the AC magnetic properties of silicon steel sheets. With built-in precision excitation current source and voltage measurement module, advanced microprocessor and digital signal processing technology, this instrument can quickly test the specific total loss (Ps) of a single sheet of silicon steel at frequencies such as 50 Hz / 60 Hz.
|
| ||
S/N | Name | Description |
| Handle | To move TS2600 conveniently |
| LCD Touch Screen | Display the measured value and set parameters through touch operation |
| Foldable Feet | Foldable. |
| Single Sheet Tester | During the test, press the small single sheet tester on the electrical steel sheet to be tested. Note that the front and rear scales of the small single sheet tester should be aligned with the area to be tested. The test area should be no less than 30 mm x 100 mm. |
| ||
S/N | Name | Description |
| Single Sheet Tester Interface | Use special test leads to connect the host and small single sheet tester. |
| RS232 | Connect to computer via RS232 data cable |
| Chassis Ground | Ensure that the chassis is reliably grounded. |
| Power Socket and Switch | AC 220V power input interface, power switch. |
S/N | Pic | Accessory | Quantity |
1 | | TS2600 Iron loss Fast Tester for Electrical Steel Sheets | 1 |
2 | | TS2600 Small Single Sheet Tester | 1 |
3 | | Test Lead (Connect TS2600 to small single sheet tester) | 1 |
4 | | AC Power Cable (10A/250V 3 Core flat pin D1-3) | 1 |
5 | | Glass Fuse (1A 250V 5 x 20mm) | 4 |
6 | | Manual | 1 |
Advanced Multifunction Calibrator Advanced Electrical Reference Standards Electric Vehicle （EV）Charging Facility Tester AC/DC Standard Source /Meter Single-phase/Three-phase Standard Meter Magnetic Parameters Measurement and Calibration Magnetic Material Testing Equipment Electrical Steel Testing Equipment