TK4965 is an interface adapter equipped with two DC charging sockets that is suitable for metrology laboratories to use existing high precision DC standard power sources to calibrate non-vehicle DC charger testers, such as TUNKIA TD1320or similar equipment from other manufacturers.
Working Current | Rated Working Current:AC 63 A |
Insulation Resistance | 500 MΩ @1000V DC( at room temperature) |
Insulation Withstand Voltage | DC+、DC- and PE > 2500V AC;DC+ and DC- > 2500V AC |
Power Supply | —— |
Temperature Performance | Working Temperature:-30°C~50°C; Storage Temperature:-30°C~70°C |
Humidity Performance | Operating Humidity:< 80% @ 30°C,< 70% @ 40°C,< 40% @ 50°C Storage Humidity:<80% R·H,non-condensing |
Altitude | < 3000 m |
Device Mass | About 8 kg |
Size | 375 mm (Width) × 265 mm (Depth) × 270 mm (Height) |
| |
Communication Interface | —— |
Advanced Multifunction Calibrator Advanced Electrical Reference Standards Electric Vehicle (EV)Charging Facility Tester AC/DC Standard Source /Meter Single-phase/Three-phase Standard Meter Magnetic Parameters Measurement and Calibration Magnetic Material Testing Equipment Electrical Steel Testing Equipment