You are here: Home » Products » Magnetic Material Testing Equipment » TY1000 Magnetic Properties Measuring System for Hard Magnetic Materials » TY1000 Magnetic Properties Measuring System for Permanent Magnetic Materials

TUNKIA TY1000 Magnetic Properties Measuring System for Permanent Magnetic Materials

Share to:

TY1000 Magnetic Properties Measuring System for Permanent Magnetic Materials

TY1000 Magnetic Properties Measuring System for Hard Magnetic Materials design conforms to the standard IEC 60404-5, GB/T 3217-2013. It consists of excitation and measurement host, electromagnet, magnetic measurement sensors, computer software, etc. It is suitable for measuring the magnetic properties of various types of hard magnetic materials and drawing hysteresis loops and curves. TY1000 has the advantages of convenient operation, fast measurement, good repeatability and high reliability.

Availability:

Quantity:



Inquire Add to Basket

Model:
TY1000
Brand:
TUNKIA

TY1000 Magnetic Properties Measuring System

for Permanent Magnetic Materials

TY1000 Magnetic Properties Measuring System for Hard Magnetic Materials

*Above picture is only for reference, subject to actual delivery

1. Summary

TY1000 design conforms to the standard IEC 60404-5, GB/T 3217-2013. It consists of excitation and measurement host, electromagnet, magnetic measurement sensors, computer software, etc. It is suitable for measuring the magnetic properties of various types of hard magnetic materials and drawing hysteresis loops and curves. TY1000 has the advantages of convenient operation, fast measurement, good repeatability and high reliability.

2. Features

• Electrical parameters calibration function.

• Slowly reduce amplitude demagnetization for sample.

• Zero drift of flux meter：<1 μWb / min.

• Low nonlinear error of the hall probe.

• Continuously adjustable bipolar magnetization current source.

• Use flux meter and coils to measure B or J.

• Use magnetometer and hall-probe or flux meter and coils or to measure H.

• Automatic compensate the residual area-turns of J-coils by software.

• Various types of coils or probes are optional.

• Coils can be customized according to specimen size.

• Hmax of the 150 mm electromagnet is up to 2.5 T.

• Hmax of the 130 mm electromagnet is up to 2.45 T.

• Typical single measurement time is 30 s.

• Computer controlled automatic measurement.

• Automatic calculates magnetic parameters and curves.

• Modular design, easy to upgrade or maintenance.

3. Application

TY1000 Magnetic Properties Measuring System for Hard Magnetic Materials Application

4. Excitation and Measurement

Magnetizing Current	Output Range	0～± 25 A
	Max. Power	1500 VA (peak)
	Protection Function	Over voltage, over current, overload, overheating
Tesla Meter	Range	0～4000 mT [1]
	Uncertainty（k=2）	0.5%*RG within 2500 mT [2]
	Characteristic	Hall-probe nonlinear correction function
Flux Meter	B Flux Meter Range	0～20 mWb
	H Flux Meter Range	0～40 mWb
	Min. Resolution	0.1 μWb
	Zero-Drift	≤ ± 1 μWb / min, auto-zero
Note：[1] Calibration only covers up to 2500mT. [2] RG is the range values.

5. Reproducibility

Magnetic Parameters	Typical Values	Guaranteed Value (Al Ni Co)	Guaranteed Value (Ferrite, Fe-Cr-Co, Rare Earth Magnet )
Br	0.3%	1.0%	2.0%
Hcb	0.3%	1.0%	2.0%
Hcj	0.3%	1.0%	2.0%
(BH)max	0.3%	1.5%	3.0%

• Testing temperature：23℃ ± 5℃.

• Specimen size should strictly follow the requirements of IEC 60404-5.

6. General Specifications

Power Supply

AC ( 220 ± 22 ) V，( 50 ± 2 ) Hz

Temperature Performance

Working Temperature：0°C～40°C；

Storage Temperature：-20°C～70°C

Humidity Performance

Working Humidity：40%～80% R·H，No condensation

Store Humidity：< 95% R·H，No condensation

7. Electromagnet (optional)

TY1000 Magnetic Properties Measuring System for Hard Magnetic Materials Electromagnet

Model	Type	Air gap	Imax	Hmax (10 mm Gap)
TD8750A-13-1	Vertical	0～80 mm adjustable	DC,± 25 A	2.45 T
TD8750A-15-1	Vertical	0～80 mm adjustable	DC,± 25 A	2.50 T

Poles Type	Model	Pole Diameter	Pole Face Diameter	Hmax (10 mm Gap)
Room temperature	TD8755A-13-13	130 mm	130 mm	1.5 T
	TD8755A-13-6	130 mm	60 mm	2.45 T
	TD8755A-15-15	150 mm	150 mm	1.5 T
	TD8755A-15-8	150 mm	80 mm	2.50 T
High temperature	TD8755D-13-8	130 mm	80 mm	1.8 T

Note: The above accessories are optional according to the testing requirements.

8. Configuration List

No.	Item Name	Number	Configuration	Note
1	TY1000	1	Standard
2	Hall probe and bracket	1	Standard
3	J coils or J-H coils	1	Standard	According to specimen size
4	Testing software	1	Standard	Installation CD-ROM
5	Test wire and junction box	1	Standard
6	TY1500 electromagnet	1	Optional
7	TY1550 electromagnet poles	1	Optional
8	TY1900 Specimen Heating Device	1	Optional	Used for high temperature performance testing
9	High temperature J-H coils	1	Optional	Used for high temperature performance testing
10	Reference specimen	1	Optional	Including certificate
11	Segment poles	1	Optional	According to specimen size
12	Workbench	1	Optional	Third party Products
13	Computer	1	Optional	Third party Products
14	Printer	1	Optional	Third party Products